TEL 400-0355-898
NEWS
Jointmethodofrubberconveyorbelt
来源:: 时间:2019-05-07

1. Turn off all power, remove the shield, loosen the motor assembly bolts, and then move the motor to loosen the conveyor belt to facilitate the removal of damaged conveyor belt. 

2. Remove the conveyor belt if there is abnormal wear and tear, then select a suitable conveyor belt to prepare for replacement. 

3. Check the protection devices such as anti-deviation, transmission protection, etc. , deviation, wear and tear and other circumstances to immediately adjust maintenance 

4, in the pulley conveyor installed, and then adjust the center distance of the transmission device, with tension measuring instrument to test the conveyor belt until the appropriate tension; Then tighten all the bolts of the motor, if tightened, may lead to poor performance of the Conveyor 

5, after the replacement is completed, the operation of the conveyor to see the situation after the replacement, if there are noise and vibration, and other circumstances, to shut down immediately, check the motor and bearings.


TEL:400-0355-898
AX:400-0355-898
Email:15303450932@163.com
ADD:KLAUSENBERG, AUGSBURG, FREISTAAT BAYERN,GERMANY

COPYRIGHT @SMARTWORTH RECORD NUMBER: JIN ICP NO. 18002288-1